Tìm Hiểu Âm Thanh Xe Hơi Shok Industries Competition SQ Car (Génesis, Morel, Shok Industries, Alpine #F1

[headshok]

Hi all,

Here's a little build log of one of my competition cars.

This car is currently being built by my Dimension Audio, Singapore.

This car is being prepared for IASCA season 2010.

This was the gear that was in the car for 2009

HU: Alpine #F1 DVI9990 + H9990
Front stage:
Tweets: Morel Supremo Picollo Tweeters
Mid range: Morel Hybrid Ovation 4"
Mid Bass: Morel Supremo 6"
Woofer :Morel Supremo 9"
Sub woofer: Morel Ultimo 12"

amps:
tweets + Mid range: Genesis 475 Class AAB
Mid bass: Genesis Dual Mono Xtreme
woofer: Genesis dual mono
Sub woofer: Genesis dual mono Xtreme

some pics of the rear setup ( will add front pics soon)

Car was gutter out totally, A pillars stripped out, door panels refabricated and the whole rear setup taken out.

For the new setup, speakers will be swapped out to EB Acoustic LS165 kit

Supremo 9" woofer will be swapped out for an Ultimo 8"

car will be rewired with Shok Industries Competition Series Power cable ( was using some puny 1/0 ga as positive) for the positive run and Shok Industries 4707 CCA ( already in the car from 2009 season)

Big 3 upgrade all with Shok 4707 CCA.

now for the pics

setup gutted out

Ultimo 8" chilling by the side

door panels already rebuilt ( missed out on the rebuild )

old sub box

the rear all nice and re-deadened

amps chilling by the site

test fit for the amps ( not yet confirmed)

some of the shok industries reference CCA 4 ga that will be going into the car

more pics to come soon

CHeers all

 

[headshok]

Hi all,

I managed to dig out some earlier pictures of the car for you guys

In an earlier setup, the front speakers were the supreme piccolos, morel hybrid ovation 4” and morel supreme 6” mid bass.

Also at one point in time, this car was running the old school #F1 ( CDA 7990 + H900).

Man I tell you, this was such an amazing sounding deck!

But we swapped it out to the newer F1 as syncing it to our laptop was kinda a pain in the ass + also it was kidna old and didn’t like some CDs ( even though they were original)

So here are the pics

Supreme 6”

the lovely 7990 + H900

 

[headshok]

Ok guys, here’s more pics

This is the enclosure for the 8” ultimo

Test fitting the sub

The empty boot

I guess the ultimo 8” is the new kid on the block, so got some pics for u guys

some simple modifications, heheheh

sub hooked up for testing J

brought out the handy RTA

look what we have here..

Helix power station chilling by the side ( also going into the car)

And also 18 ft of Shok Industries Competition Series 5200 Cable.. also waiting to go into the car..

Another setup arrangement.. looks pretty promising

2 Shok Industries 1/0 distro block at the side for power distribution and the green thingy is a batt cap.

More pics to come soon !

 

[headshok]

Hi all

How’s everyone doing!!!

Anyway, well, everyone’s been slacking and progress has been slow.

Here’s some pics for you guys.

The structure for the woofer box is already up.

Woofer will be placed in the spare-tyre well.

hmmm….. some more ideas..

a little preview of some of the designs that will be in the boot

[font="arial; color: rgb(102, 102, 102)"] [/font]
Oo yeah, the ultimo 12” and the 8” side by side.. ( that was the old box from the old setup)

stay tune for more pics!!!

Cheers all!!

 

[headshok]

Just a little update on the build so far.

The rear setup is still in the mids of being fabricated. But at least the sub box is up.

Now previously I said that the positive run of 1/0 will be replaced with my comp cable, but since I found a new spool (the last one) of my Shok Competition series cable lying around in the store, we’re taking out the old 4707 CCA and replacing it with the Competition series cable

The negative run

now for the positive side

the 10 ga power cable for the head unit

[/QUOTE]

now for the woofer box

Now for a little decoration

pair of A pillars chilling by the side.. hahaa.. ( but not for this build )

Stay tuned for more good stuff!

 

[headshok]

Hey guys.

Today we got the woofer box up and running!

Pretty interesting results too!!!

Plus some vids for you guys

A little addition to the box… heheheh..

Some RTA-ing..

some sound proofing..

[/QUOTE]


and now for some FUN!!!

A little warm up from safri duo

A little male Chinese vocals + Chinese drums..

ahh what the hell, lets have some fun….

Next up will be the amp rack! Stay tuned!

Cheers all!

 

[headshok]

Well,
Sub box is a nice fit.

Power cable on the pulled on the passenger side. The red cable is for the F1 processor.

Shok competition series cable..

now for the slow build up behind..

woofer baffle added..

now for some goodies!

Helix Power stations!!!

now for the false floor

more coming up soon 

 

[headshok]

Hi guys,

Hope everyone had a good weekend. Didn’t get much done, but at least we got the 4 ga in!

got the false floor wrapped up

Here we have 2 Shok Industries 1/0 Distributor block.

For this install, 1 block will be the positive block, the other will be the ground block.

The ground block will house all the spare fuses.

The amp rack is actually already up and wrapped up. Will be putting that in soon.

Watch out for it!

Cheers all!

 

[headshok]

hey all,

here's a little update.

had more 4 ga running in the car today.

This is the power cable, run over the driver side.

well, mess before tidying up

]now for the much awaited amp rack.

Here are some sneak peeks for u guys.. heheh..

I just realized that I never did take any vids of the ultimo 8 for u guys.

Made one specially for u folks 



stay tuned for more goodies!

Cheers all!

 

[headshok]

Hi guys,

Got a bunch of pics for u all today.

Anyway, for all those who remember the like 8”ultimo and its enclosure, well, it’ll be going into its new home very soon.. some pics for a better idea of where its going

a little covering

something u don see everyday..

now for the car itself..

the amp rack is still under construction, so I shall take close ups to keep u guys in suspense.. heheheh….. and when the whole thing is done, I’ll take a nice big pic of the whole system..

so here it goes:

2 helix capacitors for more POWAAAAAA!!

The fuse distro blocks in the back ground..

we got in-car plumbing! Fishman put a fish tank in his ride, we’re gonna put a toilet bowl!! Ok just kidding  fishman does incredible work!

hooking up the caps.

now for a little intermissiong. Here’s another car that was in the install bay at the same time.. a little install, running 2 old school PPI amps, scanspeak illuminator series and a clarion 9255. those illuminator tweeters are pretty scary!!!! car’s running the older generation Shok Industries 4707 1/0 cable, with the first gen inline fuse holder and 1/0 fuse distro block.. I wasn’t around for the install, so missed out on the pics.. 

ok now back to the car..

nicely zipptied..

cables remind me of nice candy.. yum yum..

I wonder what this could be… any guesses?

a toilet seat?

Anyway, some close up of the capacitors..

well that’s all for today.

The boot setup will be done pretty soon, then it’ll be time for the A pillar. We actually experimented the A pillar on another identical car, if u liked the pillars in the old setup, wait till u see what we have in stored for this car 

Cheers all!